Commit message (Expand)AuthorAgeFilesLines
* Set startup cap to 1650AhHEADmasterMatthias P. Braendli2021-03-211-1/+1
* Properly setup CTC mode for timerMatthias P. Braendli2021-02-251-6/+6
* Set startup cap to a conservative 1000AhMatthias P. Braendli2020-10-301-1/+1
* Add disjoncteur state messageMatthias P. Braendli2020-10-306-73620/+69
* Output Relay stateMatthias P. Braendli2020-05-032-14/+33
* Refine thresholdsMatthias P. Braendli2020-05-032-14/+14
* Set max cap to 1650 AhMatthias P. Braendli2020-04-261-1/+1
* Status LED shows CPU sleepingMatthias P. Braendli2020-04-251-3/+2
* Fix loading of EEPROM and As to mAh conversionMatthias P. Braendli2020-04-251-33/+58
* Disable DBG by defaultMatthias P. Braendli2020-04-161-0/+2
* Check relay toggling functionalityMatthias P. Braendli2020-04-163-428/+2781
* MergeMatthias P. Braendli2019-12-301-3/+7
| * Read ADCL before ADCHMatthias P. Braendli2019-12-291-2/+6
| * Set proper ADC reference selectionMatthias P. Braendli2019-12-291-1/+1
* | Add config.hMatthias P. Braendli2019-12-283-1/+31
* | Use explicit enum for battery voltage measurementsMatthias P. Braendli2019-12-281-4/+9
* | Refresh schematic libraryMatthias P. Braendli2019-12-281-13/+13
* Fix LTC2400 readoutMatthias P. Braendli2019-11-194-22/+46
* Additional changes in SPIMatthias P. Braendli2019-11-173-15/+19
* Add some LTC2400 debugMatthias P. Braendli2019-11-173-8/+8
* Replace C11 by 2.2uF instead of 4.7uFMatthias P. Braendli2019-11-173-4/+1
* Fix interval calculationMatthias P. Braendli2019-11-172-14/+18
* Fix CAPACITY length printMatthias P. Braendli2019-11-172-6/+6
* Change type of relay hold time variableMatthias P. Braendli2019-11-171-1/+1
* Add debug and wdt reset inside loopMatthias P. Braendli2019-11-171-1/+9
* Use correct ISR for timerMatthias P. Braendli2019-11-171-1/+1
* Fix fuse settings to use crystal, not ext clockMatthias P. Braendli2019-11-172-3/+6
* Add ADC measurementsMatthias P. Braendli2019-11-172-10/+83
* Specify MAX232 packageMatthias P. Braendli2019-11-041-1/+1
* Add some clarificationsMatthias P. Braendli2019-11-031-24/+41
* Add thresholds calculationMatthias P. Braendli2019-11-031-11/+60
* Rework timer_t to use microsecondsMatthias P. Braendli2019-11-033-42/+40
* Add relay toggle codeMatthias P. Braendli2019-11-037-15/+163
* Move timer stuff to commonMatthias P. Braendli2019-11-036-73/+183
* system_timer atomicity and integration interval calculationMatthias P. Braendli2019-10-271-42/+56
* Print out current_capacityMatthias P. Braendli2019-10-262-14/+45
* Add preliminary mAh accumulatorMatthias P. Braendli2019-10-264-28/+70
* Add new LTC2400 libraryMatthias P. Braendli2019-10-257-61/+346
* Pull in some Arduino code so that libraries are easier to useMatthias P. Braendli2019-10-2411-18/+1615
* Add Ampere to back silkscreen and update MPNMatthias P. Braendli2019-10-226-2253/+97454
* Correct wrong DCDC inductorMatthias P. Braendli2019-10-227-74525/+1726
* sw: rename elf to sw.elfMatthias P. Braendli2019-10-221-2/+2
* Minor routing changesMatthias P. Braendli2019-10-221-358/+330
* Run DRC and ERCMatthias P. Braendli2019-10-211-0/+23
* Change R and C to 0805, improve silkscreenMatthias P. Braendli2019-10-213-4487/+4495
* Add minor remarks and comments in swMatthias P. Braendli2019-10-212-1/+5
* Add acknowledgementsMatthias P. Braendli2019-10-191-0/+10
* Restructure lib, add uartMatthias P. Braendli2019-10-1913-20/+2043
* Add watchdogMatthias P. Braendli2019-10-192-8/+23
* Add EEPROM load/store codeMatthias P. Braendli2019-10-191-4/+83