path: root/doc
diff options
authorMatthias P. Braendli <matthias.braendli@mpb.li>2019-06-11 16:11:29 +0200
committerMatthias P. Braendli <matthias.braendli@mpb.li>2019-06-11 16:11:29 +0200
commit15d7ad8ac5bb187ac323da7dc30b9724b18c7df7 (patch)
tree944c1ab1eb6ebb97df778f3e1ce1142faf1d974c /doc
parent8b0d4b647a3ac2e21e6a8e7a902eea3ae462e213 (diff)
parent758a454aa892657720ac7c779252ba9ac336ba32 (diff)
Merge EDI input work
Diffstat (limited to 'doc')
1 files changed, 30 insertions, 0 deletions
diff --git a/doc/TIMESTAMPS.rst b/doc/TIMESTAMPS.rst
new file mode 100644
index 0000000..458f462
--- /dev/null
+++ b/doc/TIMESTAMPS.rst
@@ -0,0 +1,30 @@
+Some knowledge accumulated about timestamping
+The meaning of the timestamps changed between v2.3.1 and v3.0.0, this document gives some guidance about the interaction between different settings.
+The following table tries to summarise the differences.
+| ODR-DabMux version | Meaning of timestamp inside EDI | ODR-ZMQ2EDI wait time w | Offset that should be set in the mod |
+| Up to and including v2.3.1 | t_frame = t_mux (No offset in mux available) | positive, meaning delay after t_mux | Something larger than w + mod processing time |
+| Later than v2.3.1 | t_frame = t_tx = t_mux + tist_offset | negative, meaning delay before t_tx | Something larger than mod processing time |
+For historical reasons, ODR-DabMod decodes absolute timestamp from MNSC, not from “EDI seconds”.
+The edilib tool decodes both EDI timestamp and MNSC, and can be used to verify both are identical.
+Issues in ODR-DabMux v2.3.1
+Running ODR-DabMux against the absolute timestamp firmware has uncovered a few issues:
+ * At startup, the UTCO was not properly applied to the EDI seconds. This offset was 5 seconds (TAI-UTC offset - 32s, see EDI spec);
+ * odr-zmq2edi did not compensate for UTCO, hiding the above issue;
+ * ODR-DabMux needs a configurable offset;
+ * (minor) MNSC and EDI timestamps did not use the same internal representation, making it difficult to prove that they encode the same value;
+ * (minor) odr-zmq2edi swapped endianness when regenerating EDI from ETI (minor because only ODR-DabMod considers MNSC, and usually isn't used with EDI);
+**Important** Do not combine odr-zmq2edi with odr-dabmux of a different version!