Diffstat (limited to 'README.md')
1 files changed, 27 insertions, 0 deletions
diff --git a/README.md b/README.md
new file mode 100644
@@ -0,0 +1,27 @@
+Measure amplifier non-linearity using two-tone signal
+ # Take a USRP B200
+ # Connect its TX to the amplifier you want to measure
+ # Connect the amp to an big enough attenuator
+ # Connect to the B200 RX
+The amplitude ramp script is going to generate a two-tone (1kHz separation)
+signal at 222MHz, and record outgoing signal magnitude and phase difference
+against the source signal. The measurements are written into a CSV file.
+It's your job to ensure you don't overload the B200 input signal power (-15dBm
+last time I checked).
+First step is to gather some measurements:
+ ./amplitude_ramp.py --ampl-start 0.15 --ampl-stop 0.5 --ampl-step 0.01 --num-meas 300 --txgain 77
+This creates a measurement.csv file you can analyse with
+That's it for now.